380 owners from DB 2005 - DB SIII 2008 Discussion here.
380 PYR: By request... Please hotlink your images using www.imageshack.us or similar Feel free to insert a description of your mods etc but please keep discussion/comments out of this thread. If you wish to discuss 1) PM the owner 2) By all means please create a new thread in here to...
I wanted to create a thread that people can go to immediately to see if there is a know issue that they have a problem with and can get a quick fix rear window failure is a perfect example there was also something with the bushes in the steering Globe install you get the point
As requested: A Sticky for all your 380 dyno charts. Please post your charts and a short description of your mods, the conditions when you dyno'd, fuel etc. Don't spam this thread with discussion. If you want to discuss your dyno results please post in this thread
Hey guys, does anyone have any idea how to get these 380's to run economically am running in 13-14 range,without major mods having to be done ,so if someone has any input please help. Or someone who can tune it better would be helpful
Raptor Superchargers have just finished a survey on the magna and have come up with a possible kit using there own supercharger. They have not yet installed a s/c to a Magna. Ive been in contact with the owner and this is what they offer. centrifugal type s/c. $5000-5500 installed +chip They...
So what does everyone run? How much did they cost? What sort of mileage you getting out of them? Your thoughts on grip etc? What size rims?
So finally got that intake from the stated and fitted to other day, you could see straight away when i pulled off the smaller intake how easily (with a bit of work) the new 90mm fits into the air box i've no idea why mitsu would install this small POS onto such a brilliant engine. Anyways took it...
Went to put down the window in my 380 and the rear drivers side window dropped inside the car. Opened her up to have a looksy and the cable has dislodged and the regulator is fooked. :( lucky its under warranty but now my window is stuck down. I have to wait till tuesday now for my booking. :(
Hey guys, I've had the dredded ticking noise coming from my car for a while, happens when the car warms up and typically on idle. Ive put together a quick diy to replace the valve see below... They call it a canister purge valve at mitsubishi stealerships, note the part number on bag and...
hi guys, anyone ever changing Transmission Oil on your 380? apparently there are some kits including new Gaskets and tranny filter when you do your service. 380 has the pan vertical :ninja: and didnt find and kits for either 380 or Galant. is the only maintenance Flush and clean up of...
hey guys... as some of you are aware my 380 was making that annoying ticking noise that made it sound like it was a diesel. just an update on this, i dropped my car off to mitsubishi this morning to get the part that is causing the ticking noise replaced under warranty. I asked what was...
I grabbed this off of the wheels website and blew it up, I am 99% sure it is the new 380. Oh, if it is, then it is sexy as!!! :cool: Edit: put in a photochop with some wheels. Edit: there is a blue one in the background as well on the "fight back" pic, I thought it was something else at...
Post all your support and calls of FAKE! here :D
Here is a short step by step guide on how to change your oil on a Mitsubishi 380. Step 1: You will need 1 x Mitsubishi 380 with no warrantee left and a pure resentment for paying 130 dollars for something which takes 20 minutes of your pitiful existence. https://i.imgur.com/c2hKZ.jpg Step...
I had the timing belt tensioner go on me, so i swapped the belt at the same time (difference between belt and no belt was $60) so $740 all up. Got my reverse sensors in the mail, but i'm working so many hours i've had no time to hook them up. Filled the tank 2 weeks ago and i've still got 1/2...
OK, posting this up to remove any doubts and fears for anyone now or in the future about doing this yourself. It really IS simple, and with absolutely zero mechanical knowledge but a little common sense, you should be able to do this in 10-15 mins (depending on how many times you stop to take a sip...
Looking for the Whos, Wheres and $$$s of 380 Mods. Apart from the Typical Exhaust Mods and no Turbo/SuperCharger 1. Piggyback ECU?(Cars going to be a long laster hopefully, so this will see its worth) 2. Galant Intake?(Everyone mentions these, is it because the 380s have a tiny intake?) 3....
I'm on a search for tuners and software/hardware and all known facts relating to tuning the 380. It's the next logical step after the lite mods we've started on so far. I found some interesting facts so far in the quest. 1. The third catalytic converter is not necessary for ADR compliance...
While I'm still considering my Verada restoration, I haven't ruled out looking for another car either. I've been a real sucker for punishment with this particular KJ, everything from leaking or warped rocker covers to a bad heater core, failed steering rack, driveshafts, oil pressure switch, busted...
Whats the recommended brand for the engine oil filter? Is there a good one I should stick to, or are they all the same? Also, where to get the correct drain plug gasket? TIA
Well guys.there the are.........the reality of it that he has come through and delivered. Now ,i know it is really close to Christmas but i want to be able to confirm place an order early in the New year... So,here is your chance to bling your 380 to the max 380 GT LED COLORS ...
Well, i thought id post up what i belive i could make one into! Could this be a sign for me to continue the BOOYA legacy with a BOOYA MKII? This is just a quick 20 min chop, will do a proper chop with every detail paying attention to when ive got time and the FULL size image :D - ill work one...
Team, Good news for people like Foozrcool, Knotched, BloodAsp and all other enthusiastic owners. The TMR380 Supercharger kit is now available separately from TMR Australia. There web site simply states We are now selling the Supercharger kits from the
There are currently 24 users browsing this forum. (0 members & 24 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules